dollmolds1.gif (2653 bytes)PNB Doll Company Hat Forms

Click HERE to order Hat Braid
 

Click to see full size image

.

 

No. L001



This Lady doll straw hat has a brim turned up in the front and back which may be trimmed with ruched net, a pleated satin ribbon across the back brim which comes around and ties to keep the bonnet in place, and a looped bow and feathers trim the crown. This hat fits a 22-24 inch Lady doll with a head circumference of 10-11 inches.   Also available in size 9-10" head circumference.

 Downsized for Ultimate Fashion© Doll or 12" French Fashion Doll

Qty:

L001 requires 10 yards of 1/4 inch hat braid, L001A requires 9 yards of 1/4 inch hat braid and L001FF requires 5 yards of 1/4 inch hat braid.  Hat Braid Sold Separately

Juliette

No. L002


The brim of this Lady Doll straw hat is turned up on the left side and may be finished on the inside with ruched net or lightweight silk. A ribbon, twisted in several places, may be added around the crown, and a looped bow and feather can be used to trim the front of the crown. This hat fits a 22-24 inch lady doll with a head circumference of 10-11 inches.   

Qty:

 Requires 10 yards of 1/4 inch hat braid, sold separately.

Juliette

Birdie

No. L003


This 1870-1890 period hat styled for Fashion Lady dolls has sides that are tipped down. The crown is flat and may be decorated with a twisted ribbon around the crown, ending in a bow in the back. Feathers and a bow may decorate one side. 

Now available in three sizes:

  • 19 inches Fashion Lady with a headcircumference approximately 9 inches, requires approximately 9 yards of 1/4 inch hat braid sold separately.
  • Seeley's new 11.5 inches Fashion Lady with a head circumference approximately 6-7 inches requires approximately 6 yards of 1/4 inch hat braid, sold separately.
  • Ultimate Fashion © Doll or 12" French Fashion Doll requires 5 yards of hat braid.
Qty:
Allie

No. 022


This straw hat has a front brim that is tipped back in the center, which may be trimmed with ruched velvet to coordinate with the dress. The crown is flat in the back, and may be trimmed with pleated ribbon placed along the bottom edge, ending with a tied knot in the center back. A wide pleated ribbon may be placed around the crown with several ribbon loops and feathers.

Now available in 4 sizes:

  • child doll with a head circumference of approximatley 11 inches. Requires 15 yards of braid, sold separately.
  • child doll with a head circumference of approximatley 9 - 9 ½ inches. Requires 12 yards of braid, sold separately.
  • child doll with a head circumference of approximatley 8 inches. Requires 10 yards of braid, sold separately.
  • child doll with a head circumference of approximatley 6-7 inches. Requires 10 yards of braid, sold separately. It also fits Bleuette.
Qty:
Kukla the Klown

No. 023


The front brim of this classic straw hat is tipped back and a V section is cut into the center of the brim. It may be decorated with gathered velvet to coordinate with the dress, or made from the same goods as the costume. The crown is slightly rounded on top and the same fabric may be used to form a ribbon around the crown and a bow in the center.

Now available in three sizes:

  • 18-inches child or a 19-20 inches Fashion Lady.Head circumference is approximately 9-10 inches. Requires approximately 12 yards of 1/4 inch hat braid sold separately.
  • 13-14-inches dolls with a head circumference of 8 Inches. Requires approximately 12 yards of 1/4 inch hat braid sold separately.
  • 10 inch dolls with a head circumference of 6-7 Inches. Requires approximately 10 yards of 1/4 inch hat braid sold separately.  It also fits Bleuette.
Qty:

Punchinello

No. 025


The front and sides of this classic straw hat are tipped up and the back is tipped down. It may be decorated with a ribbon around the crown, ending in tails. A contrasting bow may be placed over the tails. This hat works well on both modern and antique. 

Now available in five sizes.

  • For dolls with a height of 24-25 inches and ahead circumference of 11-12 inches.
  • For dolls with a head circumference of 10 inches.
  • For dolls with a head circumference of 9 inches.
  • For dolls with a head circumference of 8 inches. Fits Rosette.
  • For dolls with a head circumference of 6-7 inches. Fits Bluette and Dianna Effner 10 inch dolls.
Qty:
Cyrano

No. 026


This wonderful straw hat has a front brim that is tipped back in the center. The sides of the hat hug the face. The front of the crown may be decorated with a looped ribbon, flowers and feathers. The inside of the brim may be decorated with pleated velvet or satin that coordinates with the costume. A ribbon may be twisted and placed along the back brim, attached on each side and continuing on to form the ties for the hat. 

This hat is available in two sizes:

  • Head circumference is approximately 12 -13 inches. Requires approximately 20 yards of 1/4 inch hat braid sold separately.
  • Head circumference is approximately 10 -11 inches. Requires approximately 16 yards of 1/4 inch hat braid sold separately.
Qty:
Elizabeth

No. 027


This is a simple but elegant hat. The crown is a little higher in the front than in the back. The brim is also a little wider than in the front than in the back. It may be trimmed with a large double bow in the front and a smaller ribbon twisted several times as it goes around the crown.

Now available in 3 sizes:

  • a doll with a height of 17 – 18 inches and ahead circumference of 9 – 10 inches.Requires approximately 15 yards of 1/4 inch hat braid sold separately.
  • a doll with a height of 13 – 14 inches and ahead circumference of 8 inches.
    Requires approximately 12 yards of 1/4 inch hat braid sold separately.
  • a doll with a height of 10 inches and a head circumference of 6-7 inches.  Fits Bleuette and D Effner 10" dolls.
    Requires approximately 10 yards of 1/4 inch hat braid sold separately.
Qty:

Marsha

Marsha
The brim can be covered or left "as is" which would make a very simple but elegant hat.

No. 028


This is a large hat to fit those wonderful 28 - 30 inch dolls. It has a small simple brim that is turned back after making the hat which can be covered in velvet or silk to match her costume. Or can enhance the hat further by building up the brim with more of the same fabric. Instructions for this step are included with the form. This hat fits a head circumference of 15 ½ - 17 inches.

Requires approximately 30 yards of 1/4 inch hat braid sold separately.

Our Price:  $28.95
Qty:
The Charmer

No. 029


This is a hat for Bleuette or other small 10 – 11 inch dolls. The crown is a little higher in the front than in the back. The brim is also wider in the front. The front brim is tipped back to the crown and decorated with a simple tied bow.

Now available in two sizes:

  • For Bleuette and other 10 inch dolls with a head circumference of 6-7 inches. Requires approximately 10 yards of 1/4 inch hat braid sold separately.
  • For smaller dolls with head circumference of 5 inches.
Qty:

Pinocchio

Pinocchio

No. 030


This is another hat for Bleuette or other small 10 – 11 inch dolls. The front brim of this classic straw hat is tipped back. It may be decorated with vintage cotton flowers to coordinate with the dress, or made from the same goods as the costume. The crown is slightly rounded on top. Finish decorating with silk ribbon loops on the sides, using the same ribbon for the ties. A small spray of feathers may also be added. 

Now available in two sizes:

  • For Bluette and other 10 inch dolls with a head circumference of 6-7 inches. Requires approximately 10 yards of 1/4 inch hat braid sold separately.
  • For smaller dolls with head circumferenc of 5 inches.
Qty:

Pinocchio

Pinocchio

No. 031


This straw hat has a front brim that is tipped back slightly in the center. The back of the brim is turned up and tacked to the back of the hat. This hat may be decorated by placing a ribbon around the crown adding loops of ribbon, feathers or flowers. You may also pleat some lace or ribbon and add to the inside of the brim in front. Head circumference is approximately 13 - 14 inches.

Requires approximately 30 yards of 1/4 inch hat braid sold separately.

New size available for 10.5-11.5 circumference doll.

Qty:

Pinocchio

Pinocchio

No. 032



Head Circumference 14-15 Inches

Requires approx. 35 yards of ¼ Inch Braid.

Our Price:  $29.95
Qty:


Pinocchio

No. 033


This cute cloche hat is designed to fit Bleuette, the new Seeley's Lady dolls, and Dianna Effner's 10 inch dolls or any doll head with a circumference or 6-7 inches. 

Requires approx. 8 yards of 1/4 Inch Braid.

NEW - now available for dolls with a 5 inch circumference head.

Qty:
Pinocchio

No. 034


This very popular hat is NOW available in several sizes and is styled for a child doll. The broad brim is turned up. It may be decorated with flowers or ribbon around the crown.

Now available in 5 sizes:

  • a head circumference of approximatley 12-13 inches. Requires 22 yards of braid, sold separately.
  • a head circumference of approximatley 10-11 inches. Requires 18 yards of braid, sold separately.
  • a head circumference of approximatley 9-9 1/2 inches. Requires 14 yards of braid, sold separately.
  • a head circumference of approximatley 8-8 1/2 inches. Requires 12 yards of braid, sold separately.
  • a head circumference of approximatley 7 inches. Requires 10 yards of braid, sold separately.

Qty:

Pinocchio

Pinocchio

No. 034-D


This hat fits a child doll with a head circumference of approximatley 6-7 inches. This is a smaller version of hat form 34. It fits Dianna Effner's 10 inch dolls or Bleuette. 

Requires 10 yards of 1/4 inch braid, sold separately.

Our Price:  $16.95
Qty:

Pinocchio

Pinocchio

No. 035


Another darling hat for your 10 – 11 inch dolls. The front brim is a little larger in the front and slightly tipped back. The crown is slightly rounded on top and the sides softly taper around towards the back. Finish decorating with a ribbon around the crown and a bow and in the back. Requires approximately 10yds of straw braid. Small flowers may also be added. Fits a doll with a head circumference of 6-7 inches.

Requires approximately 10 yards of 1/4 inch hat braid sold separately.

NEW - now available for dolls with 5 inch head circumference.

Qty:

Pinocchio

Pinocchio

No. 036


This wonderful hat design was inspired by the hat pictured on the front cover of The Ribbon is Free book on antique hats. Finished hat fits a doll head of approximately 13 to 14 inches in circumference.

Requires approximately 33 yards of 1/4 straw braid sold separately or as part of a Kit

Now available in 2 smaller sizes:  11.5"-12.75" circumference and for 12" French Fashion dolls.

Qty:

Pinocchio

Pinocchio

No. 037



We are proud to introduce one our newest hat formcreated by our founder Mrs. Peggy N Brown. 

This hat fits a doll with a head circumference of 13-13½ inches. 

Requires approximately 25 yards of 1/4 straw braid sold separately.

New!
Hat Form sized for dolls with 11.5 - 12" head circumference.

Qty:

Pinocchio

Pinocchio

No. 038


This adorable hat is an exact replica of an antique hat we found. The top of the crown is concave and its brim is slightly convex, allowing the hat to be worn with or without ribbon ties, or by shaping the brim in different ways. A simple decoration of antique flowers and ribbon makes it a very charming spring or summer hat.
It fits a doll with a head circumference of 10 ½ to 11 ½ inches (including wig) depending on the fullness of the wig.

It takes approximately 23.5 yds of ¼ inch braid sold separately.

Color shown is “Gazelle”

Our Price:  $21.95
Qty:

Pinocchio

Pinocchio

No. 039


 It was designed to fit Dianna Effner's 10 inch dolls, the new Seeley's Lady dolls, and Bleuette or any doll head with a circumference of 6-7-inches by our founder Peggy N Brown. 

Requires approximately 10 yds of 1/4inch hat braid sold separately.

We have downsized it to fit the Ultimate Fashion Doll. Requires 8 yards of 1/4inch hat braid sold separately or as part of a kit.

Our Price:  $16.95
Qty:

Pinocchio

Pinocchio

No. 039FF


This darling hat fits 12" French Fashion Dolls. The Hat design same as 039 now resized to fit the Ultimate Fashion dolls. If needed for the larger French Fashion heads, please let us know as there is also another size available for those.

Requires approximately 5 yds of 1/4 inch hat braid sold separately.

Our Price:  $15.95
Qty:


Pinocchio

Pinocchio

No. 040


We are glad to introduce another wonderful little bonnet for your antique or contemporary doll. The straw is shaped to form a rounded cap bonnet designed to perfectly fit the head. It has a wide front brim and tapering into a very narrow brim in the back. It fits Bleuette and Dianna Effner's 10inch dolls or any doll head with a 6-7 inches head circumference. You may decorate with flowers or ribbon to coordinate with the costume.

Requires approx. 10 yards of 1/4 Inch Braid.

Our Price:  $16.95
Qty:

Pinocchio

Pinocchio

No. 041


We are glad to introduce another wonderful little bonnet for your antique or contemporary doll. It has a wide front brim that frames the face and it tapers into a brimless back. It fits Bleuette and Dianna Effner's 10-inch dolls or any doll head with a 6-7 inches head circumference. You may decorate with ribbon and flowers to coordinate with the costume.

Requires approx. 10 yards of 1/4 Inch Braid.

NEW- now available for your dolls with 5 inch head circumference.

Qty:

Pinocchio

Pinocchio

No. 042


This classic "cowboy" hat was designed to fit Dianna Effner's 10" dolls or any head with a circumference or 6-7". It also fits Bleuette. It was featured at the UFDC 58th Annual Convention!

Requires approximately 10 yds of 1/4" hat braid sold separately.
.

Our Price:  $16.95
Qty:
 

Pinocchio

Pinocchio

No. 043


This delightful little hat has a rounded top with down-turned brim that is a little wider in the front than in the back beautifully framing the face. It fits Bleuette and Dianna Effner's 10inch dolls or any doll head with a 6-7inches head circumference. 

The braid in the pictured hat is off white and foam.

Requires approx. 10 yards of 1/4 Inch Braid.

NEW - Now availalbe for your dolls with a 5 inch head circumference.

Qty:

Pinocchio

Pinocchio

No. 044


This Victorian-inspired garden party hat has a very shallow top and a very wide flat brim. A ribbon across the top when tied, brings down the brim to fold over the sides of the head when worn. It fits Bleuette and Dianna Effner's 10inch dolls or any doll head with a 6-7inches head circumference. 

Requires approx. 10 yards of 1/4 Inch Braid.

Our Price:  $16.95
Qty:

Pinocchio

Pinocchio

No. 045


This cloche style hat is designed to fit Rosette, Bleuette's older sister or any doll head with a circumference or 8 inches. The brim is turned up slightly in front and may be decorated with ribbon. 

Requires approx. 12 yards of 1/4 Inch Braid. The braid used in the pictured hat was "natural" with "dark wheat" around the brim.

Our Price:  $17.95
Qty:

Pinocchio

Pinocchio

No. 046


This form was designed so that two styles of bonnets can be made from it. The first style has an extremely wide front brim which tapers into a very narrow back brim. A different bonnet can be made by not working the back brim. A ribbon brings the straw over sides of head as to protect the face from the sun and to keep it in place on the wearer’s head. This is a very versatile hat. The first style can be worn by a larger fashion doll by just “perching” on top of the head. The second style is suitable for younger child as a sun-bonnet. Step by step detailed instructions are included with every form.

It can go on a head circumference anywhere between 11" to 12".

See C046-A and for different views. (BOTH FROM THE SAME HAT FORM)

Requires approx. 12 yards of 1/4 Inch Braid.

Our Price:  $19.95
Qty:

Pinocchio

Pinocchio

No. 046-A


This form was designed so that two styles of bonnets can be made from it. The first style has an extremely wide front brim which tapers into a very narrow back brim. A different bonnet can be made by not working the back brim. A ribbon brings the straw over sides of head as to protect the face from the sun and to keep it in place on the wearer’s head. This is a very versatile hat. The first style can be worn by a larger fashion doll by just “perching” on top of the head. The second style is suitable for younger child as a sun-bonnet. Step by step detailed instructions are included with every form.

Pictured hat is on a 14 inch doll with the back brim removed.

Requires approx. 12 yards of 1/4 Inch Braid.

Our Price:  $19.95
Qty:

 

Pinocchio

Pinocchio

No. 047


This hat has a slightly rounded flat top and graduated-width brim (wider at the front) with wavy shape. The back of the brim forms a shallow double tuck, giving it its “perky” look. The inside of the brim is lined with generously ruched soft rose silk organdy with paler rose silk antique ribbon which winds around the crown forming a large bow at the side and decorated with delicate shaded rose and rosebuds. This beautiful hat is suitable for both antique and contemporary doll with a head circumference of 8 to 8 ½ inches. Step by step instructions are included with every form.

Requires approx. 11 yards of 1/4 Inch Braid.

Our Price:  $18.95
Qty:

 


Pinocchio

Pinocchio

No. 048



This new form will help you fashion felt hats. 

Tricorn Hat designed for 24 inch (61cm) A14T Merilie Casanova doll painted and designed by Alessandra Marcellan Thor. 

Form comes with the kit and may not be ordered separately.

Our Price:  $28.95
Qty:

Pinocchio

Pinocchio

No. 049


Fancy Straw Hat with lace, rosebuds and red ribbon decorations.

The inspiration for the brim of this awesome straw hat was a hat designed by Alessandra Thor’s for her incredibly beautiful Bru 11 in red velvet costume.

The front of this hat has a downward point at Center Front of forehead to give a “heart-shape” effect, curving up and around temples, ending about ear level. The back is rounded, designed to perfectly fit the head.
Our hat is beautifully adorned with pleated antique lace, flowers and intertwined silk ribbons. The interior front has flounce of richly gathered lace and silk ribbon. There is also a pleated lace flounce at the back of the neck. 

It takes approximately 30 yds of straw braid

Our newest Design! This hat was designed to fit Alessandra Marcellan Thor's Bru Jne 11 
Red Velvet Dress.
Fits 24 inch dolls with head circumference of 11".

Our Price:  $25.95
Qty:

 

Pinocchio

Pinocchio

No. 050


These adorable little hats were inspired by the hat on the cover of Maryann Burke's book on hats and bonets. It fits the 12" Ultimate Fashion dolls. 
For those heads in the market that are slightly larger, we have another form. When ordering, please let us know if you need a larger size.
This form can also be used to make our traditional straw hats. Instructions on how to block the felt on this form are included with each form.

Our Price:  $15.95
Qty:


Pinocchio

Pinocchio

No. 051


The design of this wonderful straw hat was inspired by the one used by Alice Leverett for one of her dolls. It fits the 12" Ultimate Fashion© dolls. 

Our Price:  $15.95
Qty:

 

Pinocchio

Pinocchio

No. 052



Empire Bonnet inspired by Godey's Lady's Book 1865. It fits the 12" Ultimate Fashion© dolls. 

Our Price:  $15.95
Qty:

 

 

Pinocchio

Pinocchio

No. 053


Adorable upturn brim bonnet. It fits the 12" Ultimate Fashion© dolls. 

Our Price:  $15.95
Qty:

Pinocchio
Photo used with permission of Alice Leverett

 

No. 054


Original design by Alice Leverett. This adorable straw hat has straight sides and flat top crown with a soft slope narrow brim. It fits the 12" Ultimate Fashion©dolls. 

Our Price:  $15.95
Qty:

 

Pinocchio

Pinocchio

No. 055



Now available!  This straw Bonnet was designed to fit 12" French Fashion dolls.  The bonnet has very wide brim at front and sides evolving into a very narrow brim at the nape. It is decorated with a band of silk ribbon and a cluster of tiny rose-tinted antique flowers.  The inside brim is lined with very lightweight silk velvet.  

 It requires 5 yards of 1/4 inch hat braid sold separately.

Our Price:  $16.95
Qty:

 


Pinocchio

Pinocchio

No. 057


No self-respecting Victorian lady, or her daughter with her doll, could be seen in public without wearing the latest in millinery fashion. This beautiful hat is a faithful reproduction of an antique.  It has a round front brim and sides that hug head to the bottom of the ears.  It is suitable for both German or French dolls.  Hat was designed and decorated by Peggy N. Brown It fits a doll with a head circumference of 11-12”. 

It takes approximately 15yds of ¼” straw braid.

Our Price:  $24.95
Qty:

Pinocchio

Pinocchio

No. 058


Cone-shaped, high top hat with its brim rolled on one side.  It is decorated with a narrow band of silk ribbon loops and feathers.   A very fashionable hat worn by ladies as well as young girls of the late 1800's.

 It fits the 12" Ultimate Fashion© dolls. 
 

Our Price:  $15.95
Qty:

Hat Braid


Pinocchio
In stock colors are listed in the pull down menu.

10 Yards of Straw

We now offer several colors by 10 yard increments. Straw is cut off the hank in one piece for multiple orders.  Price:  $9.95 

Qty:

Hank of Straw

Hanks of straw are approximately 144 yards in length. Price: $72.95

Qty:

 

   
View Cart
Check Out

Empty Shopping Cart


Welcome Page || Molds and Fashions || Paints || Brushes || Eyes || Books
Seminars, shows and upcoming events
How to Shop || Ordering Information || Contact Us

© 1998-2011, Jean Nordquist
A Doll Net Member Site designed by the Internet Visions Company.